The paper feeder is driven by a servo of a famous brand. Paper is delivered on the bottom via an intermittent belt, so paper can be fed continuously without shutdown.The paper feeder is also controlled by PLC. It has a human-machine interface, applies to card paper and corrugated paper.
The Film Feeder& Cutting Part
It is easy to adjust the basic part of the film feeder left and right in parallel.The film feeder is controlled by a servo control system of a famous brand. It is only required to enter the length to be cut on the touch screen, which improves accuracy and makes adjustment easy.The film cutter is equipped with a freely-moving device to fit different windows, which helps reduce adjusting time and improve efficiency.The film feeder can cut corners and press lines automatically. It applies to products subject to single (double) line pressing and corner cutting. Also it can be adjusted at will.
The Gluing Part
The gluing section consists of chromed sizing roller, glue separating guide, side limiter and sizing template roller. It is easy to pull out, set and clean the sizing section.The glue separating guide can be adjusted to control the range and amount of glue. In the event of shutdown, the cylinder can raise the sizing roller and it is driven by the other independent motor to avoid glue solidification.Without shutdown, the printing roller can be adjusted freely on an axial or radial basis.
Based on the original mechanism, the layout of each section of this product has been improved in order to reduce the adjusting time ,so that it becomes more efficiency and friendly. ZKT-700B is widely used for 90 degrees of angle window samples, has the function of angle cutting and scoring.
140 – 600mm
Paper box & cardboard box
Corrugated/flute up to 3mm
One or two corner cutting and creasing line speed:
Normal Pasting Speed:
Paper Width :
Film Length :
0.03 – 0.25mm,
Film Width :
30 – 400mm
|Pump Power : 1.5 kw , Machine Power : 2.2 kw|
|Machine Weight : 2800kg|
|External Dimension : 5000*1550*1770 mm|